Budda Amp Forum

Discussion of Budda amps
 
HomeHome  FAQFAQ  SearchSearch  RegisterRegister  MemberlistMemberlist  UsergroupsUsergroups  Log in  

Share | 
 

 SD18 Head & 2x12 open cab - Treble Question

View previous topic View next topic Go down 
AuthorMessage
blackkeys



Posts : 1
Join date : 2010-08-31

PostSubject: SD18 Head & 2x12 open cab - Treble Question   Tue Aug 31, 2010 1:44 pm

Hi Budda Users!

I bought a Budda SD18 Head and the Budda 2x12 Open Cab.
In the clean channel i set the treble half way up to get a nice clean sound with my Nocaster. But if I switch to the Drive Channel it is tooooo much treble for this.
Otherwise if i lower the trebles in the Drive Channel that it sounds good the normal channel without the higher treble sounds to muddy.
Any advices, tips, help???
Thanks from Germany.
Back to top Go down
View user profile
kennk



Posts : 2
Join date : 2010-04-06

PostSubject: Re: SD18 Head & 2x12 open cab - Treble Question   Sun Sep 26, 2010 1:16 am

I don't have a sd 18 but use a sd80 . I had treble problems at volume . This was caused by speaker beaming effect " a tight cone shaped high frequency that comes from the inner cone area of the speakers and radiates out, all highs . I solved this problem by using Beam Blockers from Weber speakers . This helps blend the high and lows together and mellows the tone out and saves the ears some . Ken
Back to top Go down
View user profile
 
SD18 Head & 2x12 open cab - Treble Question
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» First Sculpt: Head Hunter
» Question About Gladiator beasts.
» Dark Fusion / Mirror Force question
» Doctor figures variants list
» Comics which just make you hang your head in shame

Permissions in this forum:You cannot reply to topics in this forum
Budda Amp Forum :: Budda Superdrive-
Jump to: